Research & Development
Archive
Please browse our archive of Research & Development Papers
| Industrial Experiences with Low Density Ceramic Filter Elements |
|
|
Environmental legislation and the demands of process filtration duties have necessitated the development of effective barrier filter media that can operate under arduous conditions.....
|
|
|
| An Improved Elastometric Tracking System for Filter Belts |
|
|
Rotary Vacuum Drums (RVD) with belt discharge have been used in the industrial filtration market for many years. Key features of these filters are based on the simple premise that if filter cakes can be removed completely... ...
|
|
|
| Comparative Methods for the Pore Size Calibration of Filter Media |
|
|
For many years the main method of calibrating filter media has been via the ‘Frazer’ air permeability measurement. In more recent years the use of pore size has become more acceptable as a backup method of further calibration. ...
|
|
|
| An Abrasion Resistant Composite Filter Medium for Industrial Filtration Applications |
|
|
In many industrial filtration applications, the life of the filter media can be limited by abrasive damage. Such damage can be caused by impact of hard and sharp particulate matter in the slurry against the medium, as well ...
|
|
|
| Recycling of Process Water Using Microfiltration and Novel Composite Filter Media |
|
|
In this study dyebath recycling and decolourisation using a dual-flocculant
system combined with microfiltration has been examined, and typically above 90% of dye removal was achieved...
|
|
|